Add $50 to Cart for Free Shipping
Delivery & Return:Free shipping on all orders over $50
Estimated Delivery:7-15 days international
People:19 people viewing this product right now!
Easy Returns:Enjoy hassle-free returns within 30 days!
Payment:Secure checkout
SKU:87337747
Savant Digital Water Meter 3/8" NPT with LCD Display - 8000T The DigiFlow 8000T can monitor a single filter - flow volume or time elapsed. Users can program the flow volume and time by themselves. The DigiFlow 8000T will count down from the programmed flow volume or time value, and generate an audible alert when it reaches the end. ________________________________________________________________________ Electrical: Operating Voltage: 3 DC Volts Operating Current: 1.0 mA (work), 0.015 mA (sleep) ________________________________________________________________________ Flow Rate: 3.72 gpm, 14.1 lpm Min. 0.40 gpm, 1.5 lpm ________________________________________________________________________ General: Temperature : 0~40℃ (32~104 ℉) Pressure : Max. 6.0 bar (85 psi) Weight : 140 g (5.38 oz) Accuracy : +/- 10% Connection : 3/8 inch NPT Female ________________________________________________________________________ Content: 1. User Manual 2. AAA alkaline batteries x2 3. Quick fitting 1/4"OD-3/8"NPT@2PCS 4. Quick fitting 3/8"OD-3/8"NPT@2PCS ________________________________________________________________________ Instruction of selecting Gallon mode: 1. Press and hold the 'RESET' button for about 8 seconds until the data resets to zero and then release. 2. Wait for the display to turn off, then remove the battery. 3. Keep pressing the “RESET” button when re-install batteries. 4. Release the button when you hear a long "beep" sound. 5. The mode has now been successfully changed. 6. Allow the screen to turn off to save this mode change. The minimum water flow rate is 0.3 gallon/min.It must be installed before the Faucet and the outlet of the water purifier.If you are using an RO system, it should be installed after the pressure tank.
FAST AND EASY INSTALLATION Choose the quick fitting (1/4" or 3/8") that meets your needs, connect it to the hose you want to measure, and the installation is complete! ⚠️If you are using an RO system, it should be installed after the pressure tank.
COUNTDOWN DESIGN Freely set the target water consumption or the number of days of water consumption as needed. The countdown design allows you to monitor exactly when the water flow stops. No more worrying about exceeding your planned water consumption or forgetting to change the filter on time.
HEALTH STARTS WITH PURE WATER When the set target water usage is below 30 gallons or less than 7 days, the buzzer will beep once. When the target water usage or days have reached zero, the buzzer will beep twice and the display will flash. The alarm will sound again when the product detects water flow, effectively reminding you to replace the filter and ensuring clean drinking water at all times!
LCD DIGITAL DISPLAY You can choose liters/gallons or days as the measurement unit. ⚠️ To switch between liters and gallons — press and hold the 'RESET' button for about 8 seconds until the data resets to zero and then release. Wait for the display to turn off, then remove the battery. Press and hold the 'RESET' button again while reinstalling the battery. Release the button when you hear a long "beep". The mode has now been successfully changed. Allow the screen to turn off to save this mode change.
AUTOMATIC MEMORY When the battery is low, the buzzer will sound two warning beeps. If the battery is drained or unplugged, the last data will be saved automatically, so you don't have to worry about losing or forgetting your data.
ALWAYS AT YOUR SERVICE Whether you need help with installation or usage, our team is here to provide the support you need. Contact us directly, and we’ll do our best to assist you.
Meter works great. Nice little unit. The 3/8" pipe fittings that come with it (one pair for 1/4" plastic, the other for 3/8" plastic flex-pipe) are NOT tapered as i'd normally expect on pipe threads. So... the enormous amount of teflon tape they came pre-wrapped with looked like WAY too much. So I unwound the tape to what looked like the right thickness for a tapered fitting and... sonofagun! it leaked! So I unscrewed the fitting and rewound a foot or so of the teflon tape back on... which gave me a nice tight seal. the other possible source of leak is of course between the black O-ring deep inside the fitting and the plastic pipe. First: cut the pipe clean and square; no burrs. I used a sharp straight-edge razor blade. I also put a dab of silicone grease on the cut ends to ensure they slipped easily all the way into and through the O-rings. The pipe should travel about a little ways (1/8 to 3/16"?) after entering the o-ring... and then hit a definite bottom. After it bottome out give the pipe a little tug in the back-out direction to ensure it's well seated... then slip in the snap-ring to keep it in place. THERE WAS NEVER LEAKAGE around my 1/4" plastic pipe.
